Troubleshooting And Information Code; Troubleshooting - Samsung NV7B402 C Serie Kurzanleitung

Troubleshooting and information code

Troubleshooting

If you have any of the problems listed below try the solutions given.
Problem
The buttons
If there is foreign matter
cannot be pressed
caught between the buttons
properly.
Touch model: if there is
moisture on the exterior
If the lock function is set
The time is not
If there is no power
displayed.
supplied
The oven does not
If there is no power
work.
supplied
The oven stops
If it is unplugged from the
while in operation.
power socket
The power turns off
If continuous cooking takes
during operation.
a long time
If the cooling fan does not
work
If the oven is installed
in a place without good
ventilation
When using several power
plugs in the same socket
There is no power
If there is no power
to the oven.
supplied
14 English
SIMPLE_NV7B40403CK_U1_DG68-01419C-00.indb 14 SIMPLE_NV7B40403CK_U1_DG68-01419C-00.indb 14
Cause Action
Remove the foreign matter
and try again.
Remove the moisture and
try again.
Check whether the lock
function is set.
Check whether there is
power supplied.
Check whether there is
power supplied.
Reconnect the power.
After cooking for a long
time, let the oven cool.
Listen for the sound of the
cooling fan.
Keep the gaps specified
in the product installation
guide.
Use a single plug.
Check whether there is
power supplied.
Problem Cause
The oven exterior
If the oven is installed
is too hot during
in a place without good
operation.
ventilation
The door cannot be
If there is food residue
opened properly.
stuck between the door and
product interior
The interior light
If the lamp turns on and
is dim or does not
then off
turn on.
If the lamp is covered
by foreign matter during
cooking
Electric shock
If the power is not properly
occurs on the oven.
grounded
If you are using a socket
without grounding
There is water
There may be water or
dripping.
steam in some cases
depending on the food.
There is steam
This is not a product
through a crack in
malfunction.
the door.
There is water
remaining in the
oven.
Action
Keep the gaps specified
in the product installation
guide.
Clean the oven well and
then open the door again.
The lamp automatically
turns off after a certain
amount of time to save
power. You can turn it on
again by pressing the oven
light button.
Clean the inside of the oven
and then check.
Check whether the
power supply is properly
grounded.
Let the oven cool and then
wipe with a dry dish towel.
2022-04-26 오후 3:05:18 2022-04-26 오후 3:05:18