Installation; Prepare To Install The Oven; Power Connection; Cabinet Mount - Samsung NV7B402 C Serie Kurzanleitung

Installation

Prepare to install the oven

Phillips Screwdriver

Power connection

L N
01 02 03
01 BROWN or BLACK
02 BLUE or WHITE
03 YELLOW and GREEN
Rated current(A)
10 < A ≤ 16
16 < A ≤ 25
Check the output specifications on the label attached to the oven.
Open the rear cover of the oven using a screwdriver, and remove the screws on
the cord clamp. Then, connect the power lines to the relevant connection terminals.
The ( )-terminal is designed for earthgrounding. First connect the yellow
and green lines (earthgrounding), which must be longer than the others. If
you use a plug-type socket, the plug must remain accessible after the oven is
installed. Samsung is not responsible for accidents caused by missing or faulty
earthgrounding.
WARNING
Do not step on or twist the wires during installation, and keep them away from
heat-emitting parts of the oven.
6 English
SIMPLE_NV7B40403CK_U1_DG68-01419C-00.indb 6 SIMPLE_NV7B40403CK_U1_DG68-01419C-00.indb 6
Drill
Plug the oven into an electrical socket. If
a plug-type socket is not available due to
allowable current limitations, use a multi-
pole isolator switch (with at least 3 mm
spacing in-between) in order to meet safety
regulations. Use a power cord of sufficient
length that supports the specification H05
RR-F or H05 VV-F, min. 1.5 ~ 2.5 mm².
Minimum cross-sectional area
1.5 mm²
2.5 mm²

Cabinet mount

If installing the oven in a built-in cabinet, the cabinet must have its plastic surfaces
and adhesive parts resistant up to 90 °C. Samsung is not responsible for damage to
furniture from the oven's heat emission.
The oven must be properly ventilated. For ventilation, leave a gap of about 50 mm
between the lower shelf of the cabinet and the supporting wall. If you install the
oven under a cooktop, follow the cooktop's installation instructions.
Required Dimensions for Installation
Oven (mm)
B
C
A
D
E
L
K
G
F
J
H
I
Built-in cabinet (mm)
A
B
C
D
The built-in cabinet must have vents (E) to
E
ventilate heat and circulate the air.
A 560 G 503
B 166 H 481
C 383 I 21
D 45 J 549
E 596 K 579
F 595 L 559
A Min. 550
B Min. 560
C Min. 50
D Min. 590 - Max. 600
E Min. 460 x Min. 50
NOTE
2022-04-26 오후 3:05:06 2022-04-26 오후 3:05:06