Safety Instructions - Marquant 014439 Bedienungsanleitung

SAFETY INSTRUCTIONS

• The product must only be used for its
intended purpose and in accordance with
these instructions. The manufacturer
cannot accept liability for personal injury
or material damage resulting from
improper use of the product.
• Failure to follow all the instructions and
safety instructions can lead to the risk of
electric shock, fire, personal injury and/or
material damage.
• The product is only intended for private,
personal use and is not suitable for
commercial use.
• Only use parts and accessories
recommended by the manufacturer,
otherwise there is a risk of personal injury
and/or material damage.
• Risk of suffocation! Keep the packaging
materials out of the reach of children.
This product can be used by children from
8 years of age and by persons with
physical, sensorial or mental disabilities,
or persons who lack experience or
knowledge, if they are supervised or
receive instructions concerning the safe
use of the product and understand the
risks involved. Keep children under
supervision to make sure they do not play
with the product. Do not allow children to
clean or maintain the product without
supervision.
• Do not use the product in explosive
environments, for example near
flammable liquids, gas or dust.
• Do not use the product near a naked
flame, sparks or other sources of heat.
• Do not expose the product to water or any
other liquid. Never immerse the product
in water or any other liquid.
• Do not expose the product to rain,
splashing or moisture.
• Do not use the product in wet conditions,
or where it can be exposed to bad
weather.
• Do not place an object containing water
on the product, for example a vase of
flowers.
• Do not cover the product with
newspapers, cloths or curtains, etc.
• Do not expose the product to heat or
direct sunlight.
• Do not use the product if its cabling
or any of its components are damaged.
The product must only be repaired by an
authorised service centre or other
qualified personnel before it is used.
• Do not dismantle the product or attempt
to modify, or repair it or its cabling. If the
cabling does not suit the connections in
the vehicle in which it is to be installed,
the cabling must be modified by the
manufacturer, an authorised service
centre, or other qualified personnel before
the product is installed.
• Check the following before connecting the
product.
– Check that the product and all its
parts are undamaged. If the product
is damaged it must be returned to
the retailer to be checked and
repaired.
– Check that the voltage in the
electrical system in the vehicle
complies with the rated voltage on
the type plate.
• Do not dismantle the product or attempt
to modify, or repair it. The product must
only be dismantled, checked and repaired
by the retailer, or by other qualified
personnel.
• The product must only be used in vehicles
with a 12 VDC electrical system. NOTE:
Never connect the product to an electrical
system with another voltage (for example
6 VDC or 24 VDC).
• Follow local laws and regulations
concerning the use of the product when
driving.
EN
35