Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
8.
Maintenance and Care
Only use maintenance products and components from Schick Dental.
The use of other products and components can lead to annulment of the
warranty.
Never disassemble the device. For all modifications and repairs, we recommend you to
contact your regular supplier or Schick Dental directly. Schick Dental advises
the user to have its dynamic instruments checked or inspected at least once a year.
- Clean housing with water and a soft cleaning agent only
- Never dip into disinfectant
- Never dip into ultrasonic
Lubrication:
Lubrication should be done at least twice a day. Only use Lubrimed medical grease
and greaser:
- First-time use: Remove the cap of the greaser, screw the knurled back-housing
until the grease appears at the end of the rod.
- Remove the bur and introduce the rod of the greaser to the bottom. The dose
corresponds to one half-turn of the knurled back housing.
- Replace a bur, turn on the air and run the turbine for about 15 seconds
- Wipe off surplus grease and replace cap after use.
Cleaning of spray tubes with the wire cleaner!
Important: After cleaning and disinfecting the instrument and before using it,
operate at moderate speed, with a bur in the chuck for 10 to 15
seconds to distribute, and remove the excess lubricant!
Important: The device must not be started without a tool inserted into the chuck!
9. Optional
Accessories
It is possible to equip your turbine with
a light head.
The light head illuminates the working
area optimal. Light, exactly where it is
needed. The light intensity can be adjusted
by a potentiometer variable.
6
Werbung
Inhaltsverzeichnis
