Setting Up - Schick Dental Turbine T100 Originalbetriebsanleitung

Recommendations:
It is essential to use dry, purified compressed air in order to ensure long working
life of the device. Maintain air quality and water by regular maintenance
of the compressor and the filtration systems. The use of unfiltered hard water will
lead to early blockage of the tubes, connectors and spray cones.
After a period of prolonged use, the device must be cleaned and serviced according
to these instructions.
3. List of contents
- Turbinhandpiece
including grease, bur inserting tool and spray-needle
- Control unit
with integrated water-tank, ca. 1400 ml
- Foot switch
- All tube parts,
including connections
- Beaker
- Funnel

4. Setting up

Attach the control unit in accordance
to the picture.
- Push the lock nuts onto the tubes of
the foot switch.
Attach the foot switch tubes to the
corresponding terminal and fix them
with the locknuts.
(left: dark grey hose, right: light grey hose)
- Attach the compressed air supply to the control unit by putting the compressed
air hose into the corresponding connection.
Attention: - Compressed air tube must click in perceptibly!
- Please take care that the compressed air connection is first connected
to the milling unit and then to the compressor!
3