Technical Data - Hamron 019088 Bedienungsanleitung

SAFETY INSTRUCTIONS
SYMBOLS
Read the instructions.
Approved in accordance with
the relevant directives.
Recycle discarded product
in accordance with local
regulations.

TECHNICAL DATA

Voltage
Output
Luminous flux
Range
Protection rating
Colour temperature
Size
Weight
INSTALLATION
SPOTLIGHT AND BRACKET
FIG. 1
1. Take the spotlight and bracket out of the
packaging and orientate them as shown
in the figure.
2. Unpack the supplied screws, nuts and
washers (M8x25, M10x30, M12x30) and
insert the middle screw (M12x30) and
both long screws (M10x30) in the base
of the bracket as shown in the figure.
Washers do not need to be fitted on the
inside. Do not fully tighten the screw
union before the spotlight is correctly
installed.
12/24 V
100 W
9000 lm
1 Lux at 630 m
IP68
5900 K
203x177x100mm
2.4 kg
3. Fit the bracket on the spotlight housing
with the remaining screws (M8x25) as
shown in the figure.damaged or set of fire
if a smaller cross-sectional area is used.
EN
7