Operation - Lacor 69279 Gebrauchs- Und Instandhaltungsanleitung

CONTROL PANEL
- RUN: This button will turn on when the unit is working.
- AUTO: This button will turn on when a program is set.
- ON/OFF: Switch for manually turning on the Coffee Maker.
- PROGRAM: Switch to enable programming.
- HOUR/MIN: These buttons are used to modify the time and schedule of the program.
1.- Open the top and pour water into the Water Container. Do not fill past the maximum water level.
2.- Pour water to the level that corresponds to the amount of cups of coffee you would like to make.
3.- Once you have correctly installed the Coffee Container, place the filter on top of it.
4.- Add ground coffee inside the filter.
5.- NOTE: For general use, one spoonful of coffee with the spoon that is provided is equal to one
cup. However, the quantity can be adjusted to personal taste.
6.- Place the Glass Pitcher correctly on top of the Heating Plate so that the center of the top
comes into contact with the bottom of the Coffee Container.
7.- Connect the power cable to a outlet and the display will show "12:00".
8.- In order to manually make coffee, press the ON/OFF switch and the "RUN" light will turn on.
9.- The coffee-making process may be interrupted at any time by pressing the ON/OFF button
twice.
NOTE: The Coffee Maker is designed to be able to serve coffee while it is being made. The
Coffee Container has an anti-drip system, which will only dispense when the Glass Pitcher is
placed correctly. Do not have the Glass Pitcher out of place for more than 30 seconds, or the
liquid may overflow out of the Coffee Container.
10.- Once the cycle is finished, remove the Glass Pitcher to serve the coffee, or leave it on top of
the Heating Plate to keep it hot.
NOTE: In order to keep the coffee hot, the ON/OFF switch must stay switched on.
After 40 minutes, the Drip Coffee Maker will automatically switch off.
11.- If you are no longer going to use the Coffee Maker, press the ON/OFF button in order to switch it off.
AUTOMATIC PROGRAM
1.- Press the ON/OFF button twice and the "AUTO" light will turn on.
2.- Press the PROGRAM button once and the word "CLOCK" will appear on the upper part of the
display.
3.- Press thae HOUR/MIN buttons in order to set the current time.
4.- Press the PROGRAM button a second time and the word "TIMER" will appear at the top of the
display.
5.- Press the HOUR/MIN buttons in order to set the time that the Coffee Maker will automatically
start.

OPERATION

33