Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
tion facility and keep the work area well
ventilated.
g) Ensure that you have removed foreign ob-
jects such as nails and screws from the
workpiece before commencing sanding.
h) Do not force sander, let the tool do the
work at a reasonable speed. Overloading
will occur if too much pressure is applied
and the motor slows resulting in inefficient
sanding and possible damage to the sander
motor.
i) Don't continue to use worn, torn or heav-
ily clogged sanding paper.
j) Don't touch the moving sanding paper.
k) Hold the power tool by insulated grip-
ping surfaces, because the sanding sur-
face may contact its own cord. Cutting a
"live" wire may make exposed metal parts
of the power tool "live" and could give the
operator an electric shock.
102
EN
Technical Data
Nominal voltage
Rated power
No-load belt speed
Belt size
Grain sizes
Weight
Protection class
Degree of protection
Sound pressure level (L
)
pA
Sound power level (L
)
wA
Max. vibration emission (a
)
h
Noise & Vibration
The declared vibration total value and the de-
clared noise emission values have been meas-
ured in accordance with a standard test meth-
od (EN 62841) and may be used for comparing
one tool with another. The declared vibration
total value may also be used in a preliminary
assessment of exposure.
Warning! The vibration and noise
emission during actual use of the
power tool can differ from the declared to-
tal value depending on the ways in which
the tool is used, in particular, what kind of
work piece is machined.
Residual risks
Even if you are operating this product in
accordance with all the safety require-
ments, potential risks of injury and dam-
age remain. The following dangers can
arise in connection with the structure and
design of this product:
230-240 V / ~50 Hz
500 W
400-800 m/min
454 x 15 mm
P60, P80, P120,P240, P320
1.6 kg
/ II
IP 20
83 dB(A) / Uncertainty K = 3 dB(A)
94 dB(A) / Uncertainty K = 3 dB(A)
2.77 m/s
/ Uncertainty K = 1.5 m/s
2
2
Warning! It is necessary to identify
safety measures to protect the op-
erator that are based on an estimation of
exposure in the actual conditions of use
(taking account of all parts of the operating
cycle such as the times when the tool is
switched off and when it is running idle in
addition to the trigger time).
Try to minimize the impact of vibration and
noise. Exemplary measures to reduce vibra-
tion exposure include wearing gloves while
using the tool, limiting working time, and us-
ing accessories in good condition.
1. Injuries and damage to property due to bro-
ken application tools.
2. Danger of injury and property damage
caused by flying objects.
EN
103
Werbung
Inhaltsverzeichnis
