Product Disposal - Zelmer ZKR1300W Benutzerhandbuch

PL EN
CLEANING
Body Cleaning
Accessory Cleaning
Special Cleaning
Preservation and mainte-
nance

PRODUCT DISPOSAL

This product complies with European Directive 2012/19/EU on electrical and electronic devices,
known as WEEE (Waste Electrical and Electronic Equipment), provides the legal framework
applicable in the European Union for the disposal and reuse of waste electronic and electrical
devices. Do not dispose of this product in the bin, instead going to the electrical and electronic
waste collection centre closest to your home.
14
1. Do not immerse the machine in the water. Do not use water to shower di-
rectly on top of the machine to prevent the host body from entering the water
to avoid short circuits, electric shock, leakage, rust, and other failures.
2. Do not use a dripping wet towel to wipe the machine
3. Do not use detergent/vinegar/salt and other corrosive, strongly acidic,
strong alkaline cleaning products to clean the machine body, otherwise acces-
sible to damage the machine's surface.
4. Do not use sharp and rough tools such as wire balls to brush the acces-
sories. Otherwise, it is easy to damage the surface of the accessories.
1. Do not put the cast aluminum parts into the dishwasher or wash them with
corrosive, strongly acidic, or alkaline cleaning products. Please do not put
them into the dishwasher for cleaning. (Except for stainless steel parts or
surface-treated Teflon parts and electrophoresis parts)
2. Do not soak for a long time in detergent, saltwater, vinegar, and other
corrosive liquids; use in time to clean accessories.
3. After cleaning, dry the accessories, mainly to keep the internal parts dry in
time.
1. The rotating output shaft will produce a bit of black trace due to high speed
and friction when the machine is working. After each use, please clean it
promptly and keep the part dry.
2. Pay attention to the sharp blade and related sharp edge parts or acces-
sories.
1. You can use olive oil to apply on the blade's surface, knife plate, and mixing
pot to ensure the dry and wet environment to oxidize it.
2. When not in use, you can cover the machine with a packaging bag and
place it in a dry environment.