Herunterladen Inhalt Inhalt Diese Seite drucken

After Using Your Pressure Washer; Storing The Washer; Winding Up Of Electric Cable And High Pressure Hose; Storage Of Accessories - Berner BHPC 150-2 4-in-1 Lance Betriebsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 99

7 After using your pressure washer

7.1 Storing the washer

7.2 Winding up of electric
cable and high pressure
hose

7.3 Storage of accessories

Original Instructions
The machine should be
stored in a frost-free room!
should always be emptied of
water prior to storing as follows:
1. Stop the machine (turn the
O" and detach water
hose and accessory.
2. Restart the machine and
activate the trigger. Let the
machine run until no more
water runs through the spray
handle.
3. Stop the machine and un-
plug. Wind the electric cable
round the hooks placed on
the side of the machine.
4. Separate spray handle and
spray lance.
cable and the high pressure
hose should always be wound
5. Machines without hose
reel: Detach high pressure
on the hose storage.
Machines with hose reel:
Coil the high pressure hose
up on the hose reel.
-
and other accessories in the
holders of the machine.
Should the machine by mistake
it for damage.
NEVER START-UP A FROZEN
MACHINE.
Frost damages are not
covered by the guarantee!
up carefully.
1. Wind up the electric cable on
the dedicated hooks. Built-in
clip for good holding.
The lower hook can be
turned to release the electric
cable.
2. The high pressure washer
comes in two models: A) with
hook for storage of high pres-
hose reel (12).
The standard accessories
(A) and nozzle cleaning tool)
can be stored on the pressure
washer.
17

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

420561

Inhaltsverzeichnis