Mounting Of Spray Lance; Water Connection; Telescopic Handle - Berner BHPC 150-2 4-in-1 Lance Betriebsanleitung

5.2 Mounting of spray lance

5.3 Water connection

5.4 Telescopic handle

Original Instructions
A
B
NOTE!
Always remove any dirt from
the nipple before connecting
the spray lance to the spray
handle.
min. 10 m and max. 25 m will
be suitable.
NOTE: Connec-
tion to the public
mains according
to regulations.
1. Pull the blue quick-release
grip (A) of the spray gun
backwards.
2. Insert the nipple of the spray
lance (B) into the quick-re-
lease connection and release
it.
3. Pull the spray lance (or other
accessory) forwards to check
that it is securely attached to
the spray gun.
IMPORTANT! Only use wa-
ter without any impurities. If
sediment in the inlet water (i.e.
1. Let the water run through
the water hose before con-
necting it to the machine to
prevent sand and dirt from
penetrating the machine.
Note: Check that
in the water inlet
pipe and that it is clean and
free from debris.
2. Connect the water hose to
the water supply by means
of the quick connector (inlet
3. Turn on the water.
The machine features a tele-
scopic handle. To raise or lower
(15) and move the handle up-
wards or downwards. When a
right position.
-
13