Installation Instructions - Tesla Smart Sensor Gas TSL-SEN-GAS Benutzerhandbuch

Installation Instructions

1. Precautions
(1) Install the product indoors where devices use combusti-
ble gas (methane).
(2) Do not install the product outdoors.
(3) Ensure that the temperature of the installation envi-
ronment is within the range of 0°C to +55°C.
(4) Do not install the product in places where the product
will be affected by heat, steam, or smoke residual generated
by gas appliances (for example, above a gas stove).
(5) Ensure that there are no obstacles between the product
and gas devices, or the product may fail to detect gas
leakage.
(6) Do not install the product in places with a large airflow,
such as air intake vents, ventilators, windows, and doors, or
the product may fail to detect gas leakage.
(7) Ensure that the product is properly connected to a
power socket and that the power socket has power.
(8) You are advised to use screws to install the product. If
you use a 3M sticker to install the product, any product
damage or safety accidents incurred therefrom will be your
responsibility. However, if you choose to use a 3M sticker,
affix the product to a smooth, even, dry, and clean surface.
(9) Regularly check whether the product is attached to the
surface securely to prevent it from falling down.
5