JANE MILA Gebrauchsanweisung Seite 5

ADJUSTING THE HEIGHT OF THE HIGHCHAIR
Press the two catches found on the plastic supports on the
front legs of the chair and adjust the highchair to the
required height, you will hear the safety clicks when it has
locked into place.
CHANGING THE POSITION OF THE BACKREST
To change the reclining position of the backrest, turn the
dial in the direction indicated by the arrow and adjust the
position.
CHANGING THE POSITION OF THE FOOTREST
To change the position of the footrest, press the two side
buttons simultaneously and adjust the position of the
footrest.
FITTING THE TRAY
Insert the two lower guides of the tray into the two side
arms and slide the tray in until it locks into places. (Check it
is correctly secure).
To remove the tray, use both hands to press the lower
catches and take it off.
The tray can be used in two different positions.
FITTING THE TRAY ONTO THE BACK OF THE HIGHCHAIR
Hang the tray on the back of the highchair by slotting it
onto the 2 supports found on the back of the rear legs.
GUARANTEE INFORMATION
- This item is guaranteed against manufacturing defects as stipulated in the legal Directives and/or regulations in force on guarantees for consumer
º º
goods applicable to the European Union and those of the country in which it is marketed.
- It is essential to present the purchase invoice or receipt in order to process the guarantee through the seller of the item or, failing that, through the
manufacturer.
- The guarantee excludes anomalies or faults caused by misuse, non-compliance with the safety regulations and instructions for use and
maintenance provided, or due to wear and tear caused by normal use and regular handling of the item.
- The label containing the serial number of your model must not be torn off under any circumstances as it contains information relevant to the
guarantee.
º
º
º
º
º
º