Error Messages - Swiss Pro+ SP-DIP1400.2 Bedienungsanleitung

CAUTION:
Do not use a hard brush or any abrasive items
Don not use any acidic or abrasive detergents.
Clean the surface from food remains when it is still warm using a moist cloth or tissue.
Wash the buttons using a soft sponge and some water ,then wipe dry with a soft cloth.
Cleaning agent for surfaces: In case of stubborn ,baked-in remains ,use suitable cleaning products available at
special departments of department stores.
Clean the housing after use using a slightly moist cloth .
Make sure that no fluid matter gets into any of the opening of the housing. This might damage the device or
result and electric shock.
STORAGE
Only store the appliance clean and after it has cooled down.
During longer periods of no-use we recommend storing the appliance in its original packaging .
Always store the appliance in a well-ventilated and dry place out of reach of children.
CAUTION: Risk of breakage !
Please remember that surface can be damaged by heavy or failing objects.

ERROR MESSAGES

During operation the following error message can be displayed:
Errors
Warning Signal E0
Warning Signal E1
Warning Signal E2
Warning Signal E3
Warning Signal E4
Warning Signal E5
Warning Signal E6
Warning Signal E7
Warning Signal E8
Warning Signal E9
CHECK
Check whether the suitable pot is used.
Check whether the pot is put on the cooking plate
Check whether the voltage is too low
Check whether the socket is loose
Check whether the voltage is too high
Check whether the plate probe occurs short circuit of fault
circuit.
Check whether the plate surface temperature is too high.
Check whether the plate probe break off.
Check whether the IGBT probe occurs shore circuit.
Check whether the IGBT temperature reach very high.
Check whether the IGBT probe break off.
reserve
reserve
Check whether the errors on circuit.