Preliminary Operations; Power Supply - REKKORD AUDIO F 100P Bedienungsanleitung

1 Dustcover
2 Hinge
3 Cue control
4 Speed selector
5 Tonarm support
6 Start-Stop-Switch
7 Stylus
8 Phonocable
9 Ground

Preliminary operations

Unpack the unit and all accessories. Please keep the packaging for future use
when transporting the device.
Insert the hinges 2 in the appropriate recesses (fig. 1).
Slide the cover 1 parallel to the position of the hinges 2 (opening angle
approximately 60°) until it locks in position. In this position, the cover can be
removed at any time.

Power supply

The delivered power supply will be connected to the socket 6 (fig. 2) at the back of
the device. The mains set, corresponding to the voltage indication on the nameplate
has to be plugged in to a power-supply plug either with 230V/50 Hz or 115 V/60 Hz
on the primary side.
Fig. 1
ENGLISH
Connection to amplifier or preamp (F100)
Connect the phonocables 8 to the phono-magnetic-inputs of the amplifier or
preamp (red or black RCA-type plug = right channel, white RCA-type plug = left
channel).
Connect Ground 9 to the ground connector of your amplifier or preamp.
Connection to amplifier (F100 P)
Connect the phonocables 8 to a Line Input (CD/AUX) of your amplifier (red or black
RCA-type plug = right channel, white RCA-type plug = left
channel).
The Ground 9 has no function in this case.
Fig. 2