Inhaltsverzeichnis
Werbung
Automatic start, speed selection 33/45
The speed must be selected according to the record which is in place. If the
turntable speed is set to 33 or 45 rpm 4 the record size is automatically selected
for the automatic start.
Remove stylus cover forwards for the pick-up stylus and move switch 6 to Start.
The pick-up arm automatically lowers onto the record.
Manual start, stop
The speed must be selected according to the record which is in place. Use switch
6 to select a speed of 33 or 45 rpm.
Remove stylus cover forwards and move lift lever 3 into position
.
Now position the tonearm over the lead-in groove of the record. The tonearm can
now lowered slowly onto the record using the cueing lever 3
, thus preventing
damage to your records.
The tonearm can be raised at any position, also for brief interruptions when
playing, by using the cue control lever (cueing in position
). The platter continu-
es to rotate in this case.
At the end of record, the tonearm is automatically repositioned back on the
tonearm post and the unit is switched off.
— You can also switch off the turntable by setting switch 6 to Stop or setting the
cueing lever 3 to position
and repositioning the tonearm on the tonearm rest.
Werbung
Inhaltsverzeichnis
