Soundastic Reference Installation Und Betriebsanleitung Seite 17

Fig. 5. Connection of the power cord (supply)
6. Connect the plug of the power supply cable to the power sour-
ce – 220/240 V AC, 50 Hz or 110/120 V AC, 60 Hz (depending
on the device version).
7. Turn on the sound source and the amplifier by setting the
POWER switch to the ON position.
Fig. 6. Turning the amplifier on
17
8. Select the appropriate sounds source using the rotary switch –
the selection will be signalled by appropriate blue LED
becoming lit.
Fig. 7. Selection of the sound source
9. Set the right intensity of sound using the VOLUME potentiometer
or do it using the remote control device.
Fig. 8. Manual setting of sounds
intensity
Fig. 9. Setting the sound intensity via
remote control