Product Description; Functional Description - Uzin Utz WOLFF EXTRO 2-Stripper Originalbetriebsanleitung

Translation of the original operating instructions
EXTRO-STRIPPER 230 V
Dear Customer
You have chosen to purchase the EXTRO-STRIPPER -
the right choice when it comes to quality and
performance.
This operating manual contains important instructions
for operating the machine.
Attention!
Please read this operating manual carefully, and
ensure that all users read this manual before
operating the machine.
Observing the safety instructions protects against
situations that may endanger health and safety
and helps to prevent improper use of the machine.
Ensure that you are confident operating the machine
before commencing work. During operation is too late!
Do not allow persons to operate the machine if they
do not possess the necessary expertise to do so.
Legend
Important instructions relating to safety and damage
prevention are indicated in this operating manual by
the following symbols.
Important instructions
Warning
Warning of general danger
Wear safety glasses
Wear hearing protection
Read the instructions/notices
Special waste
Wolff GmbH & Co KG | D-74360 Ilsfeld | Ungerhalde 1 | Fon: +49 (0)7062-91556-0 | Fax: +49 (0)7062-91556-41 |
All manuals and user guides at all-guides.com

1.0 Product description

Important components of the machine
The numbering of the product features refers to the illust-
ration of the machine on the graphics page 2-3.

10 Driving wheel
11 Three star bolt
12 Lubricating nipple
13 Fixation of transport belt
14 Cable strain relief
15 Motor
16 Blade
17 Positioning hood
18 Impact
19 Switch ON/OFF
20 Raise angle Pull-Back
21 Screw Pull-Back

Functional description

Please refer to the graphics on pages 2-3 while you read
the operating instructions.
Restriction of use
The EXTRO-STRIPPER is exclusively for removing bon-
ded floor coverings in dry environments.
It should not be used for any other purpose. Wolff GmbH &
Co.KG cannot be held responsible for any damage or loss
caused by incorrect use.
www.wolff-tools.de
A
1 Handle
2 Bolt, Blade Holder
3 Main Plug
4 Emergency switch
5 Hood
6 Blade Holder
7 Clamp lever
8 Straight bracket
9 Transport wheel
EN
13