Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
WANDMONTAGE • WALL MOUNTED INSTALLATION
EN
Note: The installation must be done by two persons at least.
Step 1: Take the fireplace out of the package, and place it on a flat, non-abrasive surface.
Step 2: Remove off the screws on both sides with a Phillips screwdriver, then take off the wall bracket. The bracket
must be held tightly while screws are being removed, to avoid them from falling on the fireplace and causing damage
or injury.
Rear View of Fireplace
min. 39.4"
(100 cm)
19.7"
(50 cm)
min. 19.7"
(50 cm)
ALWAYS unplug this fireplace heater before assembly or cleaning, or before relocating. Failure to do so could
result in electric shock, fire, or personal injury.
1
Step 3: Find a safe location.
Minimum clearance on each side: 19.7" (50 cm).
Minimum clearance below:
19.7"
Minimum clearance above:
(50 cm)
Minimum clearance from the front : 3 feet (90 cm).
Choose a location near an outlet so never use an
extension cord.
DO NOT position the unit directly below a power outlet.
See Safety Information on pages 2 and 3 for warnings
about safe placement, safe installation, and proper
use of this product.
9
19.7" (50 cm).
39.4" (100 cm).
www.mayergrill.com
9
Werbung
Inhaltsverzeichnis
