Mayer Fireplaces ELEGANZA MFP-36 CURVE Montageanleitung Seite 11

WANDMONTAGE • WALL MOUNTED INSTALLATION
Note: The fireplace comes with the faux log bed in place, and can be used as it is. To switch to decorative glass or
stones, follow these steps. Have a capable adult help you.
Step 6A: With you or someone holding the glass panel, remove the two screws at the top edge of the fireplace with a
Phillips (+) screwdriver.
Step 6B: Together, carefully remove the front glass panel and set it aside on a clean soft surface.
Step 6C: Place the decorative crystal/pebbles on the fireplace ledge in any desired position.
Step 6D: Set the front glass panel back onto the firebox.
Step 6E: Align the tabs of the glass panel with the holes on the top edge of the fireplace. Thread the screws back into
the holes and tighten them both with a Phillips screwdriver.
4
6 7
Glass panel
11
www.mayergrill.com