"Offenes Fenster" Warnung - Mayer Fireplaces ELEGANZA MFP-36 CURVE Montageanleitung

TIMER EINSTELLUNGEN FÜR DIE FERNBEDIENUNG• TIMER SETTINGS ON REMOTE CONTROL
2. Set ON/OFF time and temperature on a weekly cycle
Press . When "MON" begins flashing, press
red hour and minute to turn on the heater. Press
Note: The timer can only be adjusted in 30-minute increments (i.e. 00:00 - 00:30; 00:30 - 01:00, etc.)
2. Press . When "OFF" begins flashing, use
at any time to clear the digits and shut down "OFF" timer.
3. Press again. When "18" begins flashing, use
Note: If the temperature was previously set, those digits will be shown instead of "18".
4. Press again. When "TUES" appears on the screen and "ON" begins flashing, use
and minute to turn on the heater for Tuesday.
5. Press again. When "OFF" begins flashing, use
for Tuesday.
6. Press again. When "18" begins flashing, use
7. Repeat steps 1 to 6 to set the "ON/OFF" time and temperature for Wednesday, Thursday, Friday, Saturday, and
Sunday.
8. Press or to complete programming, ensuring to aim the remote control at the receiver, located in the
middle of the appliance. The appliance will "beep" once to confirm that programming has been successful.
HINWEISE • NOTES
„Offenes Fenster" Warnung
Wenn die Raumtemperatur innerhalb von 3 Minuten um 10 Grad abnimmt, geht das Gerät davon aus, dass sich in der
Nähe ein offenes Fenster befindet. Um Energie zu sparen, schaltet die Heizung automatisch von High Heat auf Low
Heat um. Wenn sich die Heizung bereits auf Low Heat befindet, schaltet sie sich vollständig aus.
Beim Umschalten von High Heat auf Low Heat piept das Gerät dreimal und die Digitalanzeige blinkt dreimal „88",
bevor der vorhandene Heizstatus angezeigt wird.
Beim Umschalten von Low Heat auf Off piept das Gerät dreimal und die Digitalanzeige blinkt kontinuierlich „88".
Informationen zum Zurücksetzen der Heizfunktion finden Sie im Abschnitt „Fernbedienung bedienen"
Open window warning
If the room temperature decreases by 10 degrees within 3 minutes, the appliance will assume there is an open
window nearby. In order to conserve energy, the heater will automatically switch from High Heat to Low Heat, or if the
heater is already at Low Heat, it will turn off completely.
When switching from High Heat to Low Heat, the appliance will beep 3 times and the digital display will flash "88" 3
times before displaying the existing heating status.
When switching from Low Heat to Off, the appliance will beep 3 times and the digital display will flash "88" continuous-
ly.
To reset the heating function, see "operating remote control" section.
20
www.mayergrill.com
3 times. When "ON" begins flashing, use
,at any time to clear the digits and shut down "ON" timer.
to select the desired hour and minute to turn off the heater. Press
to select the desired temperature for Monday.
to select the desired hour and minute to turn off the heater
to select the desired temperature for Tuesday.
to select the desi-
to select the desired hour