Mayer Fireplaces ELEGANZA MFP-36 CURVE Montageanleitung Seite 10

WANDMONTAGE • WALL MOUNTED INSTALLATION
Step 4: Find a suitable place with a stable
base for wall mounting.
Align the wall bracket horizontally using a
spirit level and mark the points for attach-
ment. Make sure that there are no lines
(electricity, water, heating, etc.) running at
the marked points.
Now drill the holes to match the dowels you
are using.
Insert suitable screws through the holes in
the wall bracket and directly into the wall
plugs. Make sure the bracket is aligned.
Tighten all screws securely with a
screwdriver.
NOTE: We recommend that two capable adults perform this procedure.
Step 5A: With the help of a capable adult, lift the fireplace and align the two hooks on the back of the fireplace with
the slots on the wall bracket. Carefully set the hooks into the slots.
Step 5B: Secure the fireplace to the wall bracket with two ST4x8 metal screws, one on each side. Thread the screws
through the fireplace and into the wall bracket side tabs. Tighten both screws carefully with a Phillips screwdriver.
1
This next step involves GLASS! ALWAYS use extreme caution when handling glass. Failure to do so could result
in personal injury or property damage.
Note: This part explains the installation of the decorated crystal/pebbles in the fireplace. ALWAYS keep the
decorative crystal/pebbles OUT OF REACH OF CHILDREN! Leave no glass pieces where children can find them.
Failure to do so could cause a choking hazard.
10
www.mayergrill.com