CIRCUS DIVISION TP700 Technische Bedienungsanleitung Seite 6

The CIRCUS DIVISION TP700 is a free standing tripod featuring a unique series of characteristics providing signicant advantages
in terms of safety, portability, versatility and stability.
When you need a safe anchor point that adapts to all conditions, indoors and outdoors, TP700 is an extremely practical and
elegant option. A single rig for all aerial dance and acrobatic disciplines, for both amateurs and professionals.
Assembly and disassembly does not involve any complex or dangerous operations.
What surprises people most about this free standing rig is its exceptional stability.
Every detail is studied to convey a feeling of security allowing you to practice the most dynamic techniques in total tranquility.
SAFETY
TP700 is certified to work in complete safety in all professional and amateur environments. The entire structure has no welded parts
- The apex plate is 8mm thick laser cut and folded steel.
- The feet are made of 4mm thick laser cut and folded steel.
- The leg sections are made from hot-dip galvanized steel tubes so they will never rust.
- The stand and the manual winch with automatic brake guarantee maximum safety in all phases of assembly and disassembly.
SIMPLE TRANSPORTATION AND ASSEMBLY
- The heaviest component of the structure weighs 10 kg.
- The structure can be assembled and disassembled without any tools.
- The leg sections are 185cm long and come strapped together which allows them to be easily transported in most vehicles.
- All safety components and accessories fit into a 60x40x40cm case.
- The leg sections are securely and quickly fitted together using stainless steel spring buttons.
- Each leg is secured to its foot and the apex plate using a 12 mm diameter hinge pin and a spring cotter pin.
An extremely safe and fast system.
VERSATILITY
TP700 can be mounted in different configurations:
- The accessories supplied allow you to mount your props either directly to the apex plate or through a rope-pulley-clamp system
allowing you to easily hoist and replace props in just a few seconds.
- Assembling 5 sections per leg (using the 5m cable set) you get a 7.0m high structure with a 5.4 x 5.4 x 5.4m base.
- Assembling 4 sections per leg (using the 4m cable set) you get a 5.6m high structure with a 4.4 x 4.4 x 4.4m base.
- Assembling 3 sections per leg (using the 3m cable set) you get a 4.2m high structure with a 3.4 x 3.4 x 3.4m base.
- The apex plate design features several slots and holes in which silks, ropes, lyras, static trapezes and any other rigging equipment
can be mounted.
STABILITY
- 80 mm diameter legs for superior stabilty.
- The conical interlock at the base of each tapered section provides uniform weight dispersal and eliminates any possible
movement between the leg sections.
- The total weight of 110 kg ensures considerable stability and resistance to sudden weight shifts caused by strong acrobatic
moves.
REVISION
In addition to the normal inspection required before, during and after each use, this product must be inspected by a skilled person
every 12 months, starting from the date the product is first issued; this date and the subsequent checks must be recorded on the
product's life sheet: keep this literature for inspection and reference for the life of the device. Check the legibility of the product's
markings.
In case of one of the following defects are present, the product should be withdrawn from service immediately:
- cracks on metallic parts;
- permanent deformation of a metallic part;
- deep corrosion (that does not disappear after a light rubbing with sandpaper).
Any product or component showing any defect or wear, or if in doubt, should be withdrawn from service immediately.
Each product in the safety system can be damaged during a fall and must be always inspected before use it again.
Do not continue to use a product after a major fall because damage may have occurred, even if no external signs are visible.
LIFETIME
The lifetime of the product is unlimited, unless any defect appears and provided that periodic inspections are made at least every
12 months from the date the product is first used and the results are recorded in the life sheet of the product.
The following factors can reduce the lifetime of the product: intense use, damage to components of the product, contact with
chemical substances, high temperatures, tears and abrasions, violent impacts, failure to maintain as recommended. If you suspect
that the product is no longer safe and reliable, please contact PLAY S.r.l. or the distributor.
TRANSPORTATION
Protect the product from risks such as those detailed above.
USER MANUAL