Red Bull SPECT STRIVE Bedienungsanleitung Seite 7

FACE FOAM REPLACEMENT INSTRUCTIONS
1
Start at the upper corner of the
frame, either on the left or the right
side. Hold the goggle frame with
one hand and gently pull away the
foam from the velcro closure by
using the other hand. Please only
pull on the Velcro fastener.
2
Work your way around the entire
frame by pulling the foam off bit
by bit.
3
Once removed, please feel free to
wash the face foam's dirt out by
hand, using lukewarm water and
mild soap. Do NOT wash it in the
washing machine. Make sure it has
completely dried out before starting
to remount it.
4
To put the foam back in place start
in the top center and and work your
way around the frame, one side
after the other. Make sure the outer
edge of the foam fits tightly with the
goggle outline all arround.
7