Accessories - Red Bull SPECT STRIVE Bedienungsanleitung

The lens should then be cleaned with a wet soft cloth
containing mild soap.
Do not use any type of solvent or alcohol.
Dry the lens with a soft cloth by gently dabbing it or let it air
dry. Do not use dirty or abrasive cloths/paper tissues since
this will scratch the lens.
The detachable face foam can be cleaned and washed by
hand using mild soap and luke warm water.
Do not wash the STRIVE goggle or the face foam in the
washing machine.
Only by doing so you can be certain that your goggle lens
will remain undamaged for as long as possible.
STORAGE
Store your STRIVE goggle in a cool and dry place, away from
direct sunlight and/or heat (e.g. car dashboard, heater).
Storage in temperatures above 50°C is not recommended.
Always store the goggle in the supplied protective bag after
use or during transport.
Do not place your goggle face down nor squeeze or twist
them.
Following these instructions you can be assured that the
goggle will provide you with outstanding performance for a
long time.

ACCESSORIES

The STRIVE goggle includes a mounted and detachable
noseguard.
Outriggers on either side of the frame guarantee a firm fit
of the goggle while wearing a helmet. The outriggers can be
removed.
The four layer face foam of the STRIVE goggle is detachable
and can be replaced.
Tear-off films, roll-off systems and spare parts like head-
bands, noseguards or face foams can be obtained at your
local Red Bull SPECT Eyewear dealer.
The STRIVE goggle consists of a frame with various lens
colour options.
The following lenses are available: Blue Flash FC2*, Clear
Flash FC0*, Black Flash FC2*, Red Flash FC2*, Light Grey
Flash FC1* and Purple Red Flash FC2*. All lenses are suitable
for road driving (traffc light colour recognition).
*=filter categories
LENSES
The lens of the STRIVE goggle is a laminated double lens.
The outer lens is made of optical grade, impact- and scratch
resistant polycarbonate material.
The inner lens offers an anti-fog function.
5