Sticker Mule LMD03 Anleitung Seite 16

The dispenser does
not peel labels
The key doesn't
hold the liner
The dispenser
doesn't switch on
16 | English
• The liner has been loaded
incorrectly (see chapter 7: Roll
loading procedure).
• The roll is not properly tensioned
(see chapter 7: Roll loading
procedure).
• The liner has been loaded
incorrectly (see chapter 7: Roll
loading procedure).
• The key is not properly posi-
tioned on the magnets.
• The roll is not properly tensioned
(see chapter 7: Roll loading
procedure).
• Check if the jack plug is correct-
ly inserted in the dispenser.
• Check if the power supply is
properly inserted into the wall
socket.