Roll Unloading Procedure - Sticker Mule LMD03 Anleitung

8. Roll unloading procedure

Once the roll of labels is finished, before inserting a new one,
remove the waste according to the following procedure:
1. Remove the liner waste block key
of the arrow.
2. Remove the empty liner rolled up on the shaft with scrap
collection magnets
3. Remove the tensioner
4. Remove the roll-blocking flanges
from the shaft
5. Proceed with the roll loading procedure described in chap-
ter 7.
12 | English
❾
❿
.
❽
from the shaft
❼
❻
.
following the direction
❻
.
and the label roll core