WATERPROOF DIVING INTERNATIONAL W1 Benutzerhandbuch Seite 8

Lubrication
Both ends closed TIZIP MasterSeal 10 zippers need
to be lubricated on the docking end from time to
time. Please use the original TIZIP lubricant or
other available zipper lubricants. Carefully apply
over the docking end surfaces on front, back and
inside where they connect to the zipper chain.
Repeat before long term storage leaving the slider
closed and whenever the area is dry during use.
Cleaning
The TIZIP MasterSeal 10 is highly resistant to damage caused by dirt or sand.
However if dirt or sand are present, the zipper should be cleaned with soap and
water. Dirt particles can affect the sealing function if they get caught between
the chain profiles. If the TIZIP MasterSeal 10 closure is used to protect life or
sensitive material, the sealing function and cleanliness of the chain area should
be thoroughly checked prior to every usage.
14
Care instructions for YKK Aquaseal®
Smart use of zippers
Slowly move the slider when operating. Angular pulling may cause element
mis-engagement and may result in poor waterproof performance or damage
zippers. Overstretching of the top and bottom stops should be avoided.
AQUASEAL® zipper is sensitive to UV degradation, creasing, and
de-lamination and wear through friction. Folding or crushing the zipper
may affect its performance.
Cleaning
Regular cleaning with fresh water and use of a suitable lubricant is advised
in order to prevent damage to the tape and seals. Do not dry clean or
machine wash.
Lubrication
After cleaning the zipper, we recommend to apply lubricant to the zipper in order
to maintain the proper waterproof performance.
Storage
Please do not fold or bend the zippers when they are stored. Please do not store
the garment/goods under the circumstances where it will be over 60°C (140°F).
Store with the zipper completely closed, taking care not to bend it. The storage
in an opened position for long period will cause zipper bending. If this occurs,
slight leaks are possible.
WETSUIT_ENG_DE_FR_20200408 WETSUIT_ENG_DE_FR_20200408
Apply lubricant to the Top-Seal as indicated
in the diagram. The lubricant will then distribute
along the zipper elements, by operating the slider
a few times.
15