Signalled Errors - HHS Systemtechnik SolUse Easy Serie Montage- Und Bedienungsanleitung

GB
7.2

Signalled errors

7.2.1 Overview
Message
E=Error, I=Informa-
tion
Nos.
E: Overcurrent <
of the affected out-
puts >
E: BUSError
7.2.2 Operation
You can display and acknowledge messages as follows:
1.
Access the Messages menu item.
2. Turn the rotary pulse generator to display the non-acknowledged messages.
3. Press the rotary pulse generator to acknowledge a message. The message disappears.
50
Possible cause
The indicated outputs
are overloaded and
have been switched
off.
Internal communica-
tion has malfunc-
tioned.
Solution
Check the connected loads for excessively
n
high rated power.
Check the connected loads for faults.
n
Increase the limit value in the Outputs ▶
n
Maximum current menu item.
Acknowledge the message after correcting
n
the cause of the error; the outputs are
switched on again.
Contact your installer.
746.917