Configuration - Audizio ROME Bedienungsanleitung

CONFIGURATION

Here you will find the complete settings / options available to configure your own radio. On the main menu, navigate to
Configuration setting. Press OK and you will see a list of options available.
Network
•
Network Options
Always on: The WLAN function remains switched on (faster access when switching from other modes of radio).
Auto off in 30s: The WLAN function shuts down after 30 seconds when not in use (to save energy).
•
Wi-Fi Channels
Not all of the Wi-Fi channels are available in every country. There may be variation between different countries.
Therefore it is necessary to choose the Wi-Fi channels to ensure the Wi- Fi performs satisfactory.
We have already set the channels according to the requirement in different countries. Choose the country you are
staying from the list to get the correct channel.
•
Add / Remove AP
Add AP - It will scan out a list of routers around.
Add AP (WPS button) - Choose this option to connect your Wi-Fi router via WPS if the router has a WPS button.
Add AP (SmartConfig) - Choose this option to configure the W-Fi network with a smart phone through an app. It is
available on iOS App Store and android play store. Search and install the app "Esptouch".
Have your smart phone connected to the Wi-Fi network which the radio will be connected to.
It is recommended to place the radio within 2 meters from the router for better successful rate.
Follow the steps below:
1. On the radio, navigate to Configuration > Network > Add/Remove AP > Add AP (SmartConfig), press OK to confirm
2. Launch the App on your smart phone
3. The name of of the SSID (your Wi-Fi network) will show up as follow:
4. Enter the password of your network.
5. Tap "Multicast" followed by "Confirm" to complete.
14