Getting Started; Dab Mode - Audizio BARI Schnellstartanleitung

QUICK START GUIDE

GETTING STARTED

Connect the mains adaptor to the radio unit, one end to the DC IN on the radio and the other end to the mains wall outlet.
Caution: Use only the mains adaptor supplied with the radio. Connecting a power supply with a different rating will cause
permanent damage to the radio and may be hazardous.
The display on the front of the radio will light up. Then you can select your prefer language on the radio.
It will ask you if you want to Enable the <Check Network when Power on>, it is suggested to choose <Yes>. Then the radio
will always check the available WiFi network automatically.
CONNECTING TO YOUR WIFI NETWORK
The screen below will appear. You can choose <Yes> to proceed to search for the available WiFi network. If your router has
the WPS function, you can select <Yes(WPS)> to proceed.
It will then start scanning the network. After the search is done, it will display a list of the available router.
Choose your router from the list, enter the WEP(Wired Equivalent Privacy) or WPA(Wi-Fi Protected Access) code. If your
network is not enabled with security code, the unit will connect to the router automatically.
Note: The encryption code would have been set up by the person who set up and configured your network.
Please follow the steps below to enter the encryption code of your router using the buttons on the radio:
- Rotate the <Dial/Select> knob to browse the character
- Press the <Right> button to skip to the next entry
- After you finish with the entries, press the <Dial/Select> knob to confirm. Do NOT press the right button again.
To use the remote control entering the password: Press <▲> or <▼> button to select the characters. Press the < ►> button
for the next entry, press <◄> button to delete the character or to amend it. When the last character is entered, press the
<SELECT> button this time. Do NOT press the <►> button.
The radio will start connecting to the network. After the router is connected successfully.
SPOTIFY
A better way to listen at home. Listen on the Bari using the Spotify app as a remote. Enjoy the
music together.
Use your phone, tablet or computer as a remote control for Spotify. Go to spotify.com/connect to
learn how.
BT
The radio receives and plays music streamed by other BT-device. Choose BT from the main menu or use the < > button on
remote to find the BT mode. Once it enters into BT mode, it will be discoverable from other BT-devices.
1. Turn on BT on the BT device and look up the device named "Audizio Bari" from the list. Select it to start pairing.
2. If the connection is successful, it will show "Connected" on your BT-device list.
3. You can start playing music from your BT-device now.

DAB MODE

You can listen to ordinary DAB channels without internet connection. Extend the telescopic antenna or in other direction /
length of the antenna may be required to optimize the reception level.Choose the DAB from the main menu or use the < >
button on the remote to find to DAB.