PLAYKIN Quad Racer Betriebsanleitung Seite 40

INSERT THE STEERING WHEEL
1. Press the handlebar (E) on the steering shaft (Q).
Use a screw (N) and a nut (M) to secure it (place
the nut in the hexagonal hole and the screw in the
round hole).
INSTALL THE BACKREST
1. Press and lock the backrest (F) in the corresponding
position.
SWITCH ON THE POWER
1. Unscrew the screw from the seat and remove it. Remove the charger, instruction booklet and
remote control from the inside.
2. Connect the cable with the positive polarity (red) to the red terminal of the batria.
3. Install the seat.
E
E
40
M
M
Q
Q
F
F
Positive
terminal
Positive
polarity
Red wire
re d wire
black wir e
Black wire
N
N