Tesla SMART SENSOR WATER Benutzerhandbuch Seite 4

2. Press the reset button for 5S and release, the green
LED will flash for network setting.
Device pairing Hint:
Press the reset button for 5s-10s, the green LED is on, once
green LED turns off, release the reset button, the green
LED flashes, means ready for network setting.It keeps on
flashing for 20s during network setting.If pressing for more
than 10s, network setting cancelled.
The green LED will be on for 5s to indicate network setting
succeeds. If fails, the greenLED is off.
Press the reset
button for 5s
then release.
4