Chronograph: Intermediate Or Interval Timing - Michele RONDA 703 Bedienungsanleitung

Chronograph
• The minute counter measures 30 minutes per rotation.
• The center stop-second measures 60 seconds per rotation.
Center Stop-second
Minutes Counter
Weekday
PLEASE NOTE:
Before using the chronograph functions, please ensure that:
- The crown is in position I (= normal position)
- The two chronograph hands are precisely at zero position following activation of pusher
B. Should this not be the case, the positions of the hands must be adjusted. (see chapter
entitled "Adjusting the chronograph hands to zero").
Chronograph: Basic Function
(Start / Stop / Reset)
1. Press pusher A to start the center stop-second hand.
2. To stop the timing, press pusher A again.
3. To reset the 2 chronograph hands to zero positioning, press pusher B.
16
Seconds Counter
Pusher A
I II III
Crown
(Position I, II, III)
Pusher B

Chronograph: Intermediate or interval timing

1. Press pusher A to start the center stop-second hand.
2. Press pusher B to stop the chronograph.
*NOTE: Although the chronograph hands have stopped, the movement continues to record
the current timing.
3. Make up the measured time:
Press pusher B again and the 2 chronograph hands are quickly advanced to the ongoing
measured time. To continue to record intervals, continue to push pusher B.
4. Press pusher A to stop and the final time is displayed.
5. To reset the 2 chronograph hands to zero positioning, press pusher B.
Adjusting the chronograph hand to zero
1. Pull crown out to position II (Chronograph hands are in their correct or incorrect position).
2. Press pusher B to single step the minute counter hand. Press and hold pusher B to advance
the minute counter hand quickly.
3. Press pusher A to single step the center stop-second hand. Press and hold pusher A to
advance the center stop-second hand quickly.
4. Return the crown to position I.
17