Battery Life - Michele RONDA 703 Bedienungsanleitung

Chronograph: Intermediate or interval timing
1. Press pusher A to start the center stop-second hand.
2. Press pusher B to stop the chronograph.
*NOTE: Although the chronograph hands have stopped, the movement continues
to record the current timing.
3. Make up the measured time:
Press pusher B again and the 3 chronograph hands are quickly advanced to the
ongoing measured time. To continue to record intervals, continue to push pusher B.
4. Press pusher A to stop and the final time is displayed.
5. To reset the 3 chronograph hands to zero positioning, press pusher B.
Adjusting the Chronograph Hand to Zero
1. Pull crown out to position III (all 3 hands are in their correct or incorrect position.)
2. Press pushers A and B simultaneously for at least 2 seconds. Center stop hand will
rotate 360 degrees. Corrective mode is activated.
3. To adjust the center stop-second hand, press pusher A one time. Press and hold pusher A
until the second hand lines up with the 12 o'clock position.
4. To adjust the 1/10 second hand, press pusher B one time. Press and hold pusher A until the
1/10 second hand lines up with the 10.
5. To adjust the minute counter hand, press pusher B one time. Press and hold pusher A until
the minute counter hand lines up with the 30 (5040.D) or the 12 (5050.B)
6. Return crown to position I.
20

BATTERY LIFE

If your MICHELE timepiece has a chronograph function, you can extend its battery life
by ensuring the chronograph function does not run continuously.
*NOTE: The chronograph function is in use when the large second hand is in motion.
Second Hand
1. To stop the chronograph, press pusher A one time.
2. To reset the large second hand to the 12 position, press pusher B one time.
The average battery life when the chronograph is not in use is 2 years. Continuous use
of the chronograph will reduce the average life to approximately 1 year.
STOP
A
I
Crown in
position I
B
RESET
21