Technical Data - Hamron 021329 Bedienungsanleitung

TECHNICAL DATA

Size
DESCRIPTION
One flat and one convex wing mirror for a car
with a caravan. Suitable for all cars and attached
tool-free with clip-ons. Fitted with safety line to
prevent it getting lost and adjustable 90° both
horizontally and vertically. The mirrors are
CE marked. Storage bag included.
PARTS AND ACCESSORIES
1. Flat and convex mirror
2. Clamping screw
3. Wing screw
4. Safety line
FIG. 1
5. Clips, 4
6. Extra covers, 4
7. Storage bags, 4
FIG. 2
ASSEMBLY
The flat mirror is attached on the driver's side
and the convex mirror on the passenger's side.
The convex mirror is attached in the same way
as the flat mirror.
1. Press the caps (6) over the open side of
the holes for the clamping screws (2).
FIG. 3
2. Place the safety line (4) over the left wing
mirror.
FIG. 4
3. Position the fasteners at a suitable place
on the top edge of the left mirror.
FIG. 5
W11.5 x H17 cm
4. Tighten the screws (2) clockwise to fix the
fasteners firmly in place.
FIG. 6
5. Put the loose end of the strap through the
clip (5).
6. Place the strap round the back of the
mirror.
FIG. 7
7. Hook the clips (5) on the bottom edge of
the left mirror.
FIG. 8
8. Adjust the strap so that it is tight.
9. Tuck any leftover length of strap under the
tensioned strap on the back of the mirror.
FIG. 9
10. Adjust the position of the mirror by
moving the arm in or out.
11. Lock the arm in place by tightening the
wing screws (3) when the mirror is in the
required position.
FIG. 10
A ball bearing joint on the back allows the
mirror to be adjusted to the required angle.
FIG. 11
EN
9