1 Introduction Assembling
1.1
General information
This equipment should be installed, inspected, maintained and operated in ac-
cordance with EN1176-7 guidelines.
Before installation work commences, please check that you have all of
the equipment and fixation components in the parts list provided (see
Tables 3-1 and 3-2).
Any spare parts that may be required can be obtained directly from your sup-
plier.
Following installation, complete assembly instructions, maintenance in-
structions and a maintenance record must be sent to the operator who
must confirm receipt in writing. See the last page of this document.
All nuts and bolts are hot-dip galvanised or stainless steel.
One of the characteristics of stainless steel is that uncontrolled cold weld-
ing may occur when the nuts are tightened. To prevent this, it is neces-
sary to spray the nuts and bolts with Teflon spray or another similar lubri-
cant.
We hereby confirm that this play equipment has been tested and
certified in accordance with the play equipment standard EN 1176.
- 4 -
SPOGG Sport-Güter GmbH • 35614 Aßlar/Berghausen • Germany
spogg@hally-gally-spielplatzgeraete.de
F:\Montageanleitung englisch\Raumkapsel 20_01_020-01-en-010.doc
• www.hally-gally-spielplatzgeraete.de