Texas Equipment FRX 4000 Bedienungsanleitung Seite 10

GB - Table of Contents - "Original instructions"
Illustrations ........................................................................... 2
Warning symbols .................................................................. 5
Safety precautions .............................................................. 10
Assembly ............................................................................ 11
Battery ................................................................................ 11
Charging ............................................................................. 11
Clothing .............................................................................. 11
Operating the tiller .............................................................. 12
Operation zone ................................................................... 12
Adjusting the wheel/ depth skid .......................................... 12
Lubrication of gearbox ........................................................ 12
Cleaning the tiller ................................................................ 12
Storage ............................................................................... 12
Troubleshooting .................................................................. 13
Noise, vibration and precautionary measures .................... 13
Warranty terms and conditions ........................................... 13
Specifications ..................................................................... 22
Accessories ........................................................................ 23
EC Declaration of conformity .............................................. 24
Congratulations on purchasing your new tiller. Please read
this instruction manual carefully, especially the safety
warnings marked with the symbol:
Spare parts
Spare part drawings for the specific product can be found on
our website www.texas.dk If you find the part numbers
yourself, this will facilitate more rapid service.
For purchase of spare parts, please contact your dealer.
You will find a list of dealers on the Texas website.
Safety precautions
Setup
Do not put hands or feet near or under rotating parts.
Read this manual carefully. Make sure that you are
familiar with the different controls, settings and handles
of the equipment.
Know how to stop the unit and ensure that you are
familiar with emergency stop.
Never allow children or people unfamiliar with these
instructions to use the machine. Note, that local
regulations can restrict the age of the operator.
If you feel unwell, tired or have consumed alcohol or
drugs, do not operate the machine.
Always inspect the machine before usage Ensure that
no parts are worn or damaged.
Replace worn out or damaged elements and bolts in
sets to preserve balance.
The operator of the machine is responsible for people's
safety.
Never use the machine near children or animals.
The operator of the machine is held liable for any
accidents or hazards to other people and their property.
Thoroughly inspect the area, where the equipment is to
be used, if necessary, remove any foreign objects.
Beware of hazards, while working on difficult soil hence;
extremely stony or hard soil.
Boots with non-slip soles with steel jacket is required.
Avoid loose-fitting clothes.
Operation
Always start the engine from safety zone.
Do not leave the safety zone while operating the
machine, if it is necessary to leave the safety zone, turn
off the engine before leaving the zone.
After striking a foreign object, stop the engine
immediately and inspect the machine thoroughly for
damage. Repair the damage before continuing
If the machine should start to vibrate abnormally, stop
the engine and check immediately for the cause.
Vibration is generally a warning of damage.
Always turn off the engine and ensure that all moving
parts have come to a complete stop before making any
repairs, adjustments, or inspections.
Exercise extreme caution when operating on slopes.
Never operate the machine at a fast pace.
Do not overload machine capacity by attempting to work
at too fast a rate.
Do not carry passengers.
Pay attention, while the machine is in reverse.
Never allow any bystanders in front of unit.
Always disengage the blades, if not in use.
Only operate the machine at daylight or in fully
illuminated areas
Ensure a stable foothold and always keep a firm hold on
the handles. Always walk, never run.
Do not operate the equipment when barefoot or wearing
sandals.
Exercise extreme caution when changing direction on
slopes
By rear tillers, ensure that the blades are protected by
safety shield, only the part of the blades that works into
the soil must be free.
Never attempt to make any adjustments, while the
engine is running.
Use extreme caution when reversing or pulling the
machine backwards
Maintenance and storage
The engine shall be stopped when carrying out
maintenance and cleaning operations, when changing
tools and when being transported by means other than
under its own power.
Check regularly that all bolts and nuts are tightened.
Retighten if necessary.
The engine must be completely cooled before storing
indoors or covered.
If the machine unused for a period of time, please refer
to the instructions in this manual.
Maintain or replace safety and instruction labels, as
necessary.
Only use original spare parts or accessories. If not
original parts or accessories is used, the liability is no
longer applied.
Miscellaneous
The gears are delivered pre-greased. However, always
ensure they are well greased before each use.
Factory-fitted control devices, such as the handle-
mounted clutch cable, must not be removed or exposed.
Ensure that the machine is properly secured when
transported on a flatbed etc.
Due to vibrations, it is recommended to take a break for
every 30 minuttes use to avoid fatique in your arms.
10