Ambient Temperature; Operating Mode - BOMANN CL 6044 QC CB Bedienungsanleitung, Garantie

NOTE:
• Please note that for design reasons, not all features can be viewed in the remote control display in each operating mode. By pressing the
OPTION button, you can discover which features are available for individual operating modes.
• MODE button  Select an operating mode
• OPTION button  Select a feature
Cooling Mode (COOL)
Cooling mode permits simultaneous cooling of the room and reduction
of air humidity.
1. To activate cooling mode, press the MODE button until "COOL" ap-
pears in the remote control display. The cooling function will activate
if the temperature selected is lower than the temperature in the room.
(Selection using the and buttons.)
2. To optimize the air conditioning feature, adjust the temperature, the
speed and the air flow direction by pressing the appropriate buttons.
Heating Mode (HEAT)
Heating mode makes it possible to heat the room.
1. To activate heating mode, press the MODE button until "HEAT" ap-
pears in the remote control display. The heating function will activate if
the temperature selected is higher than the temperature in the room.
(Selection using the and buttons.)
2. To optimize the heating feature, adjust the temperature, the speed
and the air flow direction by pressing the appropriate buttons.
NOTE:
• If the appliance is equipped with an electric heater, then this will
delay activation of the application for a few minutes.
• An automatic thawing function may activate during heating mode.
This thawing function is indispensable for the cleaning of the appli-
ance. Frost residue on the condenser is removed in order to restore
its full heat exchange capacity. This procedure normally takes 2 - 10
minutes. The fan will stop operating during defrosting. After defrost-
ing, the appliance will automatically revert to heating mode.
Switching the Appliance on Automatically (
To program the appliance to switch on automatically, the appliance must
be turned off.
1. Press the OPTION button.
2. Use the arrow buttons to select
the remote control display.
3. Press the OPTION button again and use the arrow buttons
to adjust the desired time.
4. Confirm your selection using the OPTION button.
NOTE:
• To interrupt the adjusted function, repeat the steps described
above.
• The Timer feature can be adjusted for 30-minute intervals
Switching the Appliance Off Automatically (
To program the appliance to switch off automatically, the appliance must
be turned on.
1. Press the OPTION button.
2. Use the arrow buttons to select
the remote control display.
3. Press the OPTION button again and use the arrow buttons
to adjust the desired time.
4. Confirm your selection using the OPTION button.
NOTE:
• To interrupt the adjusted function, repeat the steps described
above.
• The Timer feature can be adjusted for 30-minute intervals.
86
CL6044CB_IM
)
and until " " appears on
and
)
and until " " appears on
and
Fan Mode (FAN)
To activate the fan mode, press the MODE button until "FAN" appears in
the remote control display.
By pressing the FAN button, you can adjust the fan speed, in the follow-
ing order:
• off ( )
• LOW ( )
• MEDIUM ( )
• HIGH ( )
• Turbo ( )
• automatic
Air Dehumidification Mode (DRY)
This feature permits the reduction of air humidity as well as improved air
quality in the room.
To switch on air dehumidification mode, press the MODE button until
"DRY" appears in the remote control display. The fan will activate with a
variable cooling cycle.
Automatic Mode (AUTO)
To activate automatic mode, press the MODE button until "AUTO" ap-
pears in the remote control display.
The fan speed and the temperature will be automatically controlled,
irrespective of the temperature in the room.

Ambient Temperature

< 20 °C
20 °C ~ 26 °C
> 26 °C
Snooze Mode ( )
The SLEEP feature automatically adjusts the temperature in order to
render the air in the room especially pleasant during the night. While
operating in cool / dehumidification mode, the adjusted temperature will
be automatically increased by 1 °C until a temperature increase of 2 °C
has been attained within a period of 2 hours.
1. To activate snooze mode, press the OPTION button.
2. Use the arrow buttons to select
the remote control display.
3. Confirm your selection using the OPTION button.
4. Use the OPTION button to switch off the "
During heating mode, the temperature is reduced by 2 °C during the first
2 hours.
After 10 hours in snooze mode, the appliance with automatically switch
off.
Energy Saving Mode (ECO)
Pressing the ECO button activates or deactivates the Eco feature. The
appliance will enter the energy saving mode. The adjusted temperature
is automatically, gradually increased without compromising climatic
comfort. This will result in low energy consumption.
Pressing and holding down the ECO button allows you to switch off the
display for the interior unit.

Operating mode

Heat
Dehumidify
Cool
and until " " appears on
" function.
17.12.20