Preparation For Operation; Positioning Of The Unit; Assembly Of The Unit - hillvert HT-LM-53A Bedienungsanleitung

11. Suction button
12. Cutting height adjustment lever
3.2.

Preparation for operation

POSITIONING OF THE UNIT

The ambient temperature must not exceed 45°C and ambient humidity should not
exceed 85%. Use the unit in properly ventilated spaces. Do not obstruct the air
intake and motor exhaust. Keep the unit away from any hot surfaces. Always keep
the unit out of reach of third parties, children and persons with reduced mental,
sensory or intellectual functions. The unit is designed to operate only in open
spaces. Before mowing, make sure the grass is not too tall or wet. Remove any large
objects such as branches, stones, etc. from the lawn. Remove any large objects such
as branches, stones, etc., that may block or damage the blade during mowing.

ASSEMBLY OF THE UNIT

When removing the unit from the packaging, be careful not to accidentally damage
the control cables attached to the handle. After removal, first attach the wheels by
placing them on the axle and turning them, then place the caps on them. Unfold the
lower part of the handle until its ends lock in the working position. Then align the
upper part of the bracket with the lower part and twist the two together using the
supplied clamping lever knobs.