Cleaning The Air Filter; Storing The Unit; Cleaning And Maintenance - Wiesenfield WIE-CLI-200 Bedienungsanleitung

D. CLEANING THE AIR FILTER
Air filters are located on both sides of the device handle. Cleaning the
elements periodically in order to maintain the proper functioning of the
unit is required. To carry out this maintenance work, remove the air filter
and clean it with the dry brush supplied (J). When cleaning, secure the unit
properly to prevent unwanted parts from entering the system.
E. STORING THE UNIT
Store the unit in a dry place and only in its dedicated carrying case. Do not
use the product if there is a suspicion of moisture getting into the
structure. Doing so may result in a system short-circuit or electric shock.
In case of suspected damage, contact the service center.
CAUTION!
any maintenance work! Touching the area around the cutting blades/head
while the unit is connected to the mains is forbidden!
CAUTION!
air filter!

3.4. Cleaning and maintenance

a) Pull out the mains plug before each cleaning and when the unit is not in use.
Disconnect the unit from the power supply before performing
Do not operate the unit without a properly cleaned and installed