Troubleshooting; Possible Cause - Scheppach PFS8000SE Original Bedienungsanleitung

16. Troubleshooting

The following table shows fault symptoms and describes remedial measures in the event of your machine failing to
work properly. If you cannot localise and rectify the problem with this, please contact your service workshop.
Fault
Water is not being
pumped
Water is not getting any
cleaner

Possible cause

Pump not connected
Pump defective
Line is soiled
Pump and filter incorrectly
positioned in relation to
each other
Pond is too large
UVC lamp defective
UVC lamp too weak
Filter is soiled
www.scheppach.com
Remedy
Connect the pump.
Repair by an authorised service centre.
Clean the line.
Read the instructions carefully and carry out the
assembly process correctly.
Choose a larger model.
Replace the UVC lamp.
Adhere to replacement interval.
Use twist-clean function.
GB | 25