Basic Operation; Material Library; Customize - Whip Mix VeriLUX Benutzerhandbuch

• Curing Time (T)
Select the duration of the curing process . The curing time can be set to any value
between one second to 20 minutes .
• Bottom light (B)
Select if you want the light at the bottom of the unit to be turned ON or OFF .

Basic Operation

• Material Library
The Material Library contains programs for all resins that have been validated by
Whip Mix . This enables the easy selection of the correct curing parameters . To select the
curing parameters for a specific material:
1. Turn and press the knob to select Material Library .
2.
Select a specific brand of 3D printing material .
3. Select a specific 3D printing material .
The display shows the curing time for the selected resin
4. Press the knob to start the curing process . The display shows the time remaining for the
curing process and shows when the curing process is complete .
• Customize
In this feature, the customer can add their settings (curing parameters) by changing the
Intensity Output (P), Duty Cycle (D), Curing Time (T), and by selecting ON/OFF for the
bottom light (B) to turn it on or off . The end-user has five slots to customize and adjust the
customized settings .
1. Turn and press the knob to select Customize .
2. Turn and press the knob to select the value you want to edit . You can edit the value for
Time (T), Intensity Output (P), Duty Cycle (D), and Bottom Light (B) .
3. Press the knob to set the value and continue to select a different value .
4. Press the Back button to go back to the list of customized settings .
VeriLUX User Manual
6