Operating Instructions; Operational Panel; Settings Parameters - Whip Mix VeriLUX Benutzerhandbuch

Operating Instructions

• User Interface
Operating Instructions
• Operational Panel
❶
Display: View the menu and related functions for Favourite, Material Library,
Customise, and System Setting.
❷
Back: Back to the previous page
1 Display: View the menu and related functions for Favorite, Material Library, Customize,
❸
START/STOP: Start/Stop curing process
and System Setting .
❹
Micro SD Card reader
2 Back: Back to the previous page
3 START/STOP: Start/Stop curing process
❺
Controller: Turn the knob in either direction to view the available options; Press the
4 Micro SD Card reader knob to select an option
5 Knob: Turn the knob in either direction to view the available options; Press the knob
for entering and selecting from the menu Machine Settings
• Settings Parameters
• Intensity Output (I)
• Intensity Output (P)
Select the light intensity according to the material characteristics, shape, and thickness.
Select the light intensity according to the material characteristics, shape, and thickness .
Level 1 is the lowest light intensity output; Level 16 is the highest light intensity output . Level 1 is the lowest output (i.e. 43.8 mA LED for 7018 mW/cm2 light intensity); Level 16 is t
Range of light intensity output:
highest (i.e. 700 mA LED for 112295 mW/cm2 light intensity)
LED current: 43 .8 — 700 mA
Light intensity: 7018 — 112,295 mW/cm
NOTE: For the best results curing a flat and thin print, we strongly recommend using a lower intensity o
and a longer curing time.
NOTE: For the best curing results for a flat and thin print, we strongly recommend
using a lower intensity output and a longer curing time .
• Duty Cycle (D)
• Duty Cycle (D)
It is the ratio of pulse duration and time gap . Select the period of illumination per cycle
Select the period of illumination per cycle according to the characteristics of the print.
according to the characteristics of the print . Level 1 is 10% working cycle (shortest period
Level 1 is the shortest period of illumination (i.e. 10% of the cycle); Level 10 is constant illumin
of illumination); Level 10 is 100% working cycle (constant illumination) .
NOTE: For the best results curing a small print, we strongly recommend using a lower
• Curing Time (T)
intensity output and a longer curing time .
Select the duration of the curing process. The curing time can be set to any value between o
second and 20 minutes.
VeriLUX User Manual
❶
2
BACK
❷
NOTE: For the best results curing a small p
strongly recommend using a lower intensit
output and a longer curing time.
5
❸ ❹ ❺