System Settings; Factory Settings; Date; Time - swim-tec CL2 Deluxe WiFi Salz 1,6 l/h Bedienungsanleitung

Inhaltsverzeichnis

Verfügbare Sprachen

"Disinfection". Pressing the OK button for 2 seconds activates manual control for the

selected area.

Attention: Since the dosing pump functions with maximum performance (100%) until

the setpoint is reached, this can lead to over-dosing.

Reason: If a water care product is pumped into the nozzle pipe, a time delay will occur

in conjunction with the pool hydraulics until such time as the water enriched with water

care products again reaches the measuring cells.

3.3 System settings

Resets all settings to the factory settings

Setting for date

Setting for time

Setting for language; the activated language is displayed

Password-protected area, not released

3.5 IDS – Intelligent Dosing System

Automatic adaptation of dosing time limit.

In a swimming pool, the framework conditions are constantly changing, for example,

due to the addition of fresh water or the reduction in chlorine concentration in the water

care product.

For safety reasons, a strict dosing time limit switches the dosing off after the specified

time. When using IDS, the device registers that the values are stabilising and

automatically extends the dosing time limit. This prevents premature safety

deactivation in most cases.

The system is set to IDS 1 at the factory. A change to or deactivation of the IDS is

carried out in the system settings sub-menu. Press the arrow buttons to select the IDS

menu item, and confirm using OK.

You can select the following settings:

IDS OFF: Intelligent Dosing System is deactivated.

IDS 1: Recommended for indoor pools and small outdoor pools

Inhaltsverzeichnis