Menu Mode/Changing Parameters - swim-tec CL2 Deluxe WiFi Salz 1,6 l/h Bedienungsanleitung

Multiple errors are alternated on the display.
The dosing is automatically continued by Flow and Level after the elimination
of any problems.
The resetting of the Limit error message is carried out using the OK button.
The switch-on delay follows. This can also be cancelled using OK.
➢ ! – Additional display in temperature range with temperatures < 5°C
➢ Min. alarm and max. alarm for pH and redox
see section 4.4 + 4.5 for pH and 5.4 + 5.5 for redox
3

Menu mode/changing parameters

Stop
Manual
control
control
unit
System
Control unit pH
settings
Factory
Calibration
settings
Setpoint
Date
Time p range
Language Min. alarm 6.8
Configuration Max. alarm 7.6
Lag time
IDS 2
Min. output level
Delay 8min
Max. output level
Limit pH
120 min
Limit disinf.
0min
Control
unit
disinfection
Testing of
probe
Setpoint
7.2 650mV
p range
-1
20mV
Min. alarm
550mV
Max. alarm
750mV
Lag time
0 0
15%
100%
36
Test WLAN
mode set-up
Web set-
Pump pH
up mode
Pump Manual
disinfection set-up
Alarm IP
relay address
WLAN
Level of pH
SSID
Level of WLAN
disinfection password
Flow MAC
Sensor address
Flow rate
Input pH
Input
Redox
Input
temp.
Input CL
CLE 3
Input CL
CLB 3