Troubleshooting; Cleaning And Maintenance - Conrad 2388665 Originalbetriebsanleitung

8. Troubleshooting

The cordless handheld vacuum cleaner you have purchased has been designed according to the state of the art and
is reliable in operation. Even then problems and malfunctions can occur. The following section provides an explanation
of how to rectify possible malfunctions.
Always observe the safety information and all other instructions in this manual.
Issue
No function.
Suction force is too low.
Dirt is not sucked in.
The LED flashes.

9. Cleaning and maintenance

• The product contains no user serviceable parts and there is no need to open or disassemble it (apart from the activi-
ties for removing the dirt tank or fine filter described in these operating instructions). Repair and maintenance work
(including opening the product) must be done by a technician or specialist repair centre.
• The cordless handheld vacuum cleaner should always be turned off before cleaning it.
• Use a dry, clean and lint-free cloth to clean the exterior of the product.
Do not use any aggressive chemicals or cleaning agents. These can discolour the plastic surface or dam-
age the lettering. Never clean the product with abrasive detergents, alcohol, petrol, spirits or other similar
liquids.
28
Solution
• Recharge the battery.
• The dirt tank is full and needs to be emptied.
• The fine filter is clogged and needs to be cleaned.
• The nozzle is clogged, possibly due to too large dirt particles. Check the
nozzle and eliminate clogging.
• Recharge the battery.
• The nozzle is clogged, possibly due to too large dirt particles. Check the
nozzle and eliminate clogging.
• Dirt particles are firmly attached to the surface. Use the brush nozzle
and spray feature if necessary.
• Keep the nozzle closer to the dirt to be removed.
• The rechargeable battery is empty. Turn off the cordless handheld
vacuum cleaner and charge the battery completely.