Operation; Charging The Battery; Attaching/Removing A Nozzle; Switching On And Off - Conrad 2388665 Originalbetriebsanleitung

7. Operation

a) Charging the battery
Observe section 6. g).
The cordless handheld vacuum cleaner battery is charged only partially upon delivery. Make sure to charge
it first before operating the cordless handheld vacuum cleaner.
The red LED (3) flashing slowly during operation indicates that the battery is empty and needs to be
charged.
• Press the on/off button (4) to turn off the cordless handheld vacuum cleaner: the LED (3) goes off and the drive
motor comes to a standstill.
• Carefully open the charging socket rubber cover (6).
• Insert the round plug of the included charger into the charging socket.
• Plug the charger into a suitable mains (wall) socket. The green LED (3) flashing slowly indicates that the battery is
charging. When the battery is fully charged, the green LED (3) glows steadily.
It takes about 3 to 4 hours to fully charge a completely empty battery.
• When charging is complete, firstly unplug the charger from the mains socket and then remove the round plug from
the charging socket of the cordless handheld vacuum cleaner. Carefully close the charging socket rubber cover (6).
b) Attaching/removing a nozzle
The package includes 3 different nozzles (see illustration in section 4) for different applications:
• Nozzle with roller brush: It is best suited for carpets.
• Flat nozzle: Its pointed shape enables to remove soiling from hard-to-reach places. The flat nozzle can also be
used to remove spillages.
• Brush nozzle: It is ideally suited for wet cleaning using the spray feature. Dirt sprayed with water gets wet and can
easily be brushed and sucked into the wide suction opening.
To attach:
Push the desired brush nozzle correctly onto the connector (1) of the cordless handheld vacuum cleaner until it clicks
into place.
To remove:
As you hold the red button on top of the brush nozzle, pull it forward off the cordless handheld vacuum cleaner. Do
not use excessive force.
c) Switching on and off
Briefly press the on/off button (4) to turn the appliance on or off. As a function indicator, the LED (3) lights up green
when the cordless handheld vacuum cleaner is turned on.
The red LED (3) flashing slowly during operation indicates that the battery is empty and needs to be
charged. In this case, turn off the cordless handheld vacuum cleaner and charge the battery, as described
in section 7. a).
24