Intended Purpose; General Description; Enclosed Parts; Overview - Grizzly BKS 25 L Originalbetriebsanleitung

Intended purpose

The pole pruner is intended for pruning
the branches of trees.
It is not designed for extensive sawing
work, felling trees or cutting other ma-
terials such as masonry, plastic or food
products.
Young persons of age 16+ may operate
the pole pruner under grown-up supervi-
sion.
Make sure to take a secure stand to pre-
vent accidents.
The appliance is not intended for use
by persons with a physical, sensory or
mental handicap. The same applies to
children.
The manufacturer shall not be liable for
damages caused by non-intended or
inappropriate operation. The unit is not
designed for commercial use.

General description

The illustration how to handle the
appliance can be found on page 2 -
4.

Enclosed parts

Open the package and check if its con-
tents are complete:
- Pole pruner
- Guide bar
- Saw chain
- Guide bar sheath
- Shoulder strap
- Round handle
- Spark plug wrench
- Instructions for use

Overview

1 Motor casing
2 Spark plug connector
3 Fuel pump
4 Air filter lid
5 Choke lever
6 Fuel tank
7 Starter handle with starter cord
8 Throttle lock
9 Throttle
10 On/Off switch
11 Eyelet for strap
12 Upper shaft tube
13 Antivibration handle
14 Spacer bow
15 Safety catch
16 Wing nut securing the alum. tube
17 Bottom shaft tube
18 Shaft extension
19 Safety catch (shaft extension)
20 Wing nut securing the shaft ex-
tension
21 Chain wheel cover
22 Nut securing the chain wheel
cover
23 Saw chain
24 Bar (chain guide rail)
25 Oil tank
26 Oil tank cap
27 Stopping lever for swivelling cut-
ter head
28 Guide bar sheath
29 Shoulder strap

Safety equipment

10 On/Off switch
turns the motor on or off. Unlock it be-
fore trying to restart the motor.
8 Throttle lock
prevents accidental revving up of the
motor. You need to press the throttle
lock before the throttle will operate.
GB
99