Hilti SR 6-22 Original Bedienungsanleitung Seite 24

▶ directing dust away from the face and body,
▶ wearing protective clothing and washing exposed areas of the skin with water and soap.
▶ Risk of injury by falling tools and/or accessories. Before starting work, check that installed accessories
are secure.
▶ Keep the air vents clear at all times. Risk of burn injuries due to blocked air vents!
▶ Take frequent breaks and do physical exercises to improve the blood circulation in your fingers. High
vibration during long periods of work can lead to disorders of the blood vessels and nervous system in
the fingers, hands and wrists.
▶ Do not attach a belt hook to this product.
▶ Do not look directly into the light source (LED) of the product and do not aim the beam at other persons'
faces. Risk of dazzling or eye damage.
▶ The user and persons in the vicinity must wear suitable eye protection, hard hat, ear protection, protective
gloves and light respiratory protection while the product is in use.
▶ Flying fragments can injure the body and eyes. Wear personal protective equipment and always wear
eye protection and protective gloves.
▶ Wear protective gloves when changing the accessory tool. Touching the accessory tool can result in
cuts and burns.
▶ Keep your hands away from the cutting area and the blade. Keep your second hand on the auxiliary
handle or the motor housing. When both hands are on the saw they cannot be injured by it.
▶ Wait until the product has come to a complete stop before you lay it down.
▶ Do not use dull or damaged blades. These cause increased friction and present a high risk of the saw
blade binding or kicking back.
▶ Secure the workpiece in a sturdy holder. Never hold the workpiece with your hand or across your leg.
▶ Switch the product on only after bringing it to the working position.
▶ When working with the product, always guide it away from your body.
▶ Do not reach underneath the workpiece.
▶ Apply only moderate pressure and cut at an appropriate speed, especially when cutting large-diameter
pipes. This will help to prevent the product overheating.
▶ Always use a saw blade of appropriate length. The saw blade must over the workpiece while the complete
Hubs stroke.
▶ Never cut into unknown materials and make sure the path of the saw is free of obstructions above and
below the workpiece.
▶ The product can kick back if the saw blade comes into contact with an obstructing object.
▶ Bring your arms into a position in which you can absorb the kickback forces.
▶ The product must be pressed against the workpiece until the contact shoe makes firm contact. This
ensures optimum and safe progress as you work.
▶ Position yourself off to one side of the blade, never bring the blade into line with your body. The saw can
jump backward toward you if kickback occurs!
▶ If the saw blade binds or when you interrupt work for any reason, switch off the saw and hold it motionless
in the material until the saw blade comes to a complete stop. Never attempt to remove the saw from the
workpiece or pull the saw back while the blade is in motion, as otherwise the saw could kick back.
▶ When restarting a saw in the workpiece, center the saw blade in the kerf and check that saw teeth are
not in engagement with the workpiece.
▶ Use extra caution when sawing into walls or other blind areas. As it enters the material the blade might
encounter a hidden obstruction, resulting in kickback.
▶ Engage the transport lock before storing or transporting the product.
▶ Comply with the manufacturer's instructions for handling and storing saw blades.
▶ If work involves break-through, always secure the area on the side opposite where the work is carried
out.
▶ Before beginning work, check the working area for concealed electric cables or gas and water pipes.
External metal parts of the product could give you an electric shock or cause an explosion if you
accidentally damage an electric cable or a gas or water pipe.
▶ When cutting through pipes, hold the product above the level of the pipe you are cutting through.
▶ The product is not protected against ingress of moisture. Liquid running out of a pipe can cause a
short circuit in the product.
▶ Before cutting through pipes, make sure that they are empty of medium. Drain the pipes if necessary.
18 English 2243124
*2243124*